Zirtec has a very extensive line of equipment by suction gun, pressure, modular cabs and some automated machines. Consult us with your need.

An innovation for cabinets are the “Y” models that incorporate a pulsed air jet cartridge-type dust collector, minimizing dust in the work environment.

All ZIRTEC equipment is built with the concern for environmental preservation and operator safety. This is reflected in the selection of materials used, filtration systems and component recyclability.

MANUAL EQUIPMENT ZS 9075/E
Blasting cabinet with suction gun and traditional balloon type dust collector. Working chamber with:
  • Depth = 750 mm
  • Width = 900 mm
  • Height = 700 mm
It is offered with various gun sizes. Suitable for Glass Microspheres, Aluminum Oxide and other light abrasives.
MANUAL EQUIPMENT ZS 9075/ED
Enclosure with through flange for long parts. It has special double layer rubber diaphragms on doors up to 450mm in diameter. High performance suction gun blasting and traditional balloon type dust collector. Working chamber with:
  • Depth = 750 mm
  • Width = 900 mm
  • Height = 700 mm
It comes with a variety of gun sizes, air pedal and throttle air filter. Suitable for Glass Microspheres, Aluminum Oxide and other light abrasives.
ENVIRONMENTAL EQUIPMENT ZS 9075/Y
It is the ZS 9075 blasting cabinet with built-in Dust Collector. Cartridge type filter with built-in pulsating air jet. Significantly improves ambient air by better fine dust filtration by not having to “hit” the collector for cleaning. A closed waste container is incorporated. Operators will have much less contact with dust and the peripheral environment will require fewer cleaning actions. Indicated where clean environments are desired. ZS 120/110 / Y Same suction equipment with Depth = 1,100 mm; Width = 1,200 mm and Height = 1,100 mm
ECONOMIC EQUIPMENT ZS 7570/E
Compact Suction Blasting Cabinet with dimensions:
  • Depth = 700 mm
  • Width = 750 mm
  • Height = 700 mm
ZS 7570 / Y Same cabinet with Filter Dust Collector Built-in Cartridge
PRESSURIZED BLASTING OFFICE ZP 120/110 Y
Suitable for heavier abrasives such as steel or stainless steel grit, conditions that require high production, for blasting with plastic abrasive. Usually sold in “Y” configuration with cartridge type dust collector. Several nozzle sizes are offered.
Model Height Width Depth
ZP 9075 700 900 750
ZP 120/110 1,100 1,200 1,100
Various table capacities available.
OPTIONS AVAILABLE FOR ALL OFFICES
- Turntable. - Door diaphragm for long parts. - 02 pistols with vertical movement. - Rotary drum for small parts. - Higher Productivity Pistols. - and others upon request.
HEAVY DUTY ZP 4242 CABINET (Pressure) / ZS 4242 (Suction)
In this line there is a 42 ”turntable (optional 62”) which is easily accessible through the front opening of the cabinet leaving 60% of the table free and ready to receive heavy parts via hoist. Tables for 500, 1,000, 1,500 and 2,000 kg Available heights: 42 ”, 62”, 82 ”. Marketed only with pulsed jet cartridge dust collector. Available options: Swivel drum, 02-door diaphragm (for long parts and piping), 02 nozzles, vertical gun movement, pressure tanks of various capacities.
AUTOMATIC BLASTING EQUIPMENT ZAR 700
With planetary tables Various table diameters available (700, 1,000, 1,200 and 1,500 mm) Pressure or Suction. Vertical movement of guns / nozzles Multifilter dust collector. Operator loads / unloads parts from the front side of the equipment. Separate blasting and blowing chambers.
ZJU 55 WET JET EQUIPMENT
Zirtec has a specific line for applications involving wet blasting with special abrasives such as fine aluminum oxide, ceramics, glass microspheres, plastic, garnet, etc. The equipment can be supplied with various table diameters and heights (up to 82 "). The cabinet and tank are usually stainless steel and have various types of filtration, hydrocyclones and oil skimmers. They are available with 2 bar to 1000 bar pressure pumps as well as optional rinse and drying stages. Operations may be manual or automated.
MODULAR BLASTING CABINS
For larger parts where operator enters Cab to sandblast parts. Several sizes and capacities available. The system is modular and can be purchased in steps:
  • Front Doors
  • Sheet Metal Blasting Booth
  • Lamps
  • Mug Lift and Abrasive Scrubber
  • Jet Machine (1 to 4 outputs)
  • PPE (Personal Protective Equipment)
  • Multi-cartridge pulsed jet cleaning dust collector.
cabinemodular
PRESSURIZED JET MACHINE - ZJP
They operate with all abrasives. Built to all international safety standards. Capacity 100, 280, 560, 1,120, 3,400 and 4,530 liters Single or Double chamber (to facilitate abrasive loading during operation) Number of outputs: 1, 2 or 4 nozzles Operator Protection Kit (optional) Pneumatic remote control (optional)
  • Phone
    +55 (11) 3388-3534

  • Rua Muniz de Souza, 306
    Aclimação, São Paulo - SP

© Copyright 2024 zirtec by getsource